
Add to Cart
Huawei 5100 Series Remote Radio Units RRU5152-d AC 02312JHK= Frequency Band
RRU Functions:
The Remote Radio Unit (RRU) consists of the high-speed interface unit, signal processing unit, power amplifier, duplexer,
extension ports, and power module.
The RRU performs the following functions:
* Receives downlink baseband data from the BBU and sends uplink baseband data to the BBU.
* Receives RF signals from the antenna system, down-converts the signals to intermediate frequency (IF) signals, amplifies the IF signals, performs analog-to-digital conversion, and up-converts RF signals to the transmit (TX) band.
* Multiplexes receive (RX) and TX signals on the RF channel so that these signals can share the same antenna channel, and filters the RX and TX signals.
* Provides a built-in Bias Tee (BT). The built-in BT couples RF signals and OOK signals and transmits them through the TX/RX port A. The built-in BT also supplies power to the tower mounted amplifier (TMA).
* The RRU can work with the Monitoring Extension Box (MEB). The MEB can transmit external RS-485 communication signals and dry node monitoring signals into the RRU, implementing information monitoring and reporting.
* When an RRU is equipped with an AC/DC power module, the RRU and the power module together are called an AC RRU.
Take the Following Model RRU 5909 As Example |
|
|
|
|
|
|||||||||||||||
Model |
Frequency Band (MHz) |
Receive Frequency Band (MHz) |
Transmit Frequency Band (MHz) |
Mode |
IBW (MHz) |
|||||||||||||||
RRU5909 |
1800 |
1710 to 1785 |
1805 to 1880 |
GSM, LTE FDD and GL |
45 |